TheTurret-Block® with O.D. /I.D. capability allows you to increase your
tooling capability to 12 O.D. and up to 48 I.D. tools. It can be tooled for
specific parts in standard VDI tool holders and exchanged in minutes. Our
unique coolant valve allows individual coolant to each tool, and can be
turned on/off with a ¼ turn of the valve screw. We have several models
available for machines from 5HP to 50 HP and special designs with O.D. and 4
I.D. tool capabilities. With this innovative Turret-Block® you have
unlimited flexibility for creative set ups, to drastically reduce machine
down time caused by tooling change over. We offer a simple preset gage for
easy consistent tool change and set up.
We have three models;
1.5" sq. x 5" long with a 1/2"
shank with 1/2 O.D. tool slot and (4) .7505" I.D. holes.
2"sq. x 5"
long, with 3/4" shank with 3/4" O.D. tool slot and (4) .7505" I.D.
holes.
2.75"sq. x 11.12 long, 1" shank with a 1" O.D.
tool slot and (4) 1.7505" I.D. holes.
Our unique manifold allows independent coolant to each
tool and can be turned on/off with a 1/4 turn of a valve screw.
click picture to watch video
sizes
VDI-30, 40, 50 to Lockline coolant Adapter
$2.50 Each
Put your coolant where you need it. Attach standard lockline
fittings to your VDI-30, 40 and 50, standard turret and compatible, with this adapter.
VDI-30, 40, 50 To 1/4" ID Tubing
$3.00 Each
Put your coolant where you need it. Attach standard 1/4" ID
tubing to your VDI-30, 40 and 50, standard turret and compatible, with this adapter.
EWS and compatible to lockline coolant adapter
$2.75 Each
Put your coolant where you need it. Attach standard lockline
fittings to your EWS standard turret and compatible, with this adapter.
1/8 inch NTP to 1/4 inch (ID) tubing high flow adapter
$3.00 Each
Put 1/4 inch (ID) tubing onto your 1/8" NTP fitting with
maximum flow by using our adapter. it features a large .201 diameter through
to increase coolant flow.
1/4 inch NTP to 1/4 inch (ID) Tubing high flow adapter
$3.25 Each
Put 1/4 inch (ID) tubing onto your 1/4" NTP fitting with
maximum flow by using our adapter. it features a large .201 diameter through
to increase coolant flow.
Raise your Handle Bars up 2
inches for a more comfortable riding position. This allows multiple pivoting
positions. Also makes it possible to use Hand guards, Hand muffs and/or
Gauntlets. For Yamaha, Arctic Cat, and many other makes and
models, call for details.
The hood has 2 torx type screws holding it in
place and require a screw driver to extract, which could be cumbersome on
the trail. Our screws provide the ability to hand tighten and loosen to
remove the hood for repair or maintenance. For
all '07 F-Series models.
When you loosen the adjustable windshield it
is somewhat sticky and has a tendency to pull out of the track. Our stops
clip on to the end of the windshield to provide a positive stop which
prevents the windshield from falling out of the track. For '07 LXR and Z1 models only.
Adjust spring tension on front and rear
suspension without using a spanner wrench. Split design makes it easy to
install, no need to remove shocks from the machine. Gives you ultimate
suspension adjustability in all riding conditions.
click picture to enlarge
*THE DEALER DISCOUNT IS 20%
If paying by mail send to: KZ Precision Inc. - 1 Mason Place -
Lancaster, NY 14086
